How to Sew Quilt Sashing — Cutting Math, Cornerstones & a Layout That Lies Flat
Some quilt tops want a little space between the conversation. Sashing — the strips sewn between blocks — is that space: it separates busy blocks, stretches a small set of blocks across a bigger quilt, and quietly rescues the tops where the blocks refuse to match in size. It looks like simple straight sewing, and it is, but the difference between sashing that lies flat and sashing that waves comes down to cutting math, pressing direction, and assembly order. If you can keep a consistent quarter-inch seam, you already own every skill this guide needs.
When Sashing Earns Its Place
Sashing is optional — blocks sewn edge to edge make perfectly good quilts, as most of the tops from our first quilt tutorial do. Add it when one of three things is true:
- The blocks are busy. Lots of seams and strong prints read better with a visual pause between them; plain sashing acts like the mat around a framed picture.
- You're short on blocks. A 3×4 grid of 10-inch blocks with 2-inch sashing and cornerstones covers noticeably more bed than the blocks butted together — useful math when a quilt needs to grow without more piecing.
- The blocks disagree. Blocks from a swap, a sampler, or an ambitious first attempt rarely finish identically. Sashing gives each one its own seam allowances to hide inside, and the lattice absorbs small differences instead of advertising them.
The Cutting Math, Written Out
Two numbers decide everything: width and length. Width follows one rule — cut the finished width plus 1 inch for seam allowances. A 2-inch finished sashing cuts at 2.5 inches wide, which is exactly a jelly-roll strip if you like shortcuts.
Length follows a second rule — cut to the unfinished block size. For 12-inch finished blocks, that's 12.5-inch strips; the sashing sews onto the block's 12.5-inch side and stays true to it. For a grid of C columns × R rows with sashing between blocks but not on the outer edges, the count is (C − 1) × R vertical strips between blocks, plus the long horizontal strips and cornerstones covered below. Cutting one or two spare strips at the start is cheaper than cutting a third of a strip later.
Cornerstones: The Little Squares That Line Everything Up
Where four sashing strips meet at the intersections, you can let plain sashing meet itself, or drop in a cornerstone — a small contrasting square (same size as the sashing width finished) at each junction. Cornerstones do two jobs: they add a second color in a clean geometric rhythm, and they give you registration points to pin to when joining rows, which keeps vertical sashing strips perfectly aligned instead of drifting a quarter inch per row. Cut cornerstones the same size as the sashing's finished width plus 1 inch (2.5-inch squares for 2-inch finished sashing).
Assembly: Rows First, Then the Long Strips
- Build each row. Sew block–sashing–block–sashing–block across, ending with a sashing strip on the far side if you want sashing to frame the outer blocks too. Use the same chain-piecing rhythm you'd use for any straight sets.
- Build the long horizontal strips. For the strips that will run between rows, sew sashing squares together with cornerstones between them: cornerstone–sashing–cornerstone–sashing–cornerstone until the strip matches the row length. Seams in these long strips press toward the sashing.
- Join row to strip. Pin at every cornerstone intersection and every block–sashing seam. Match and nest the seams — the same technique from pressing quilt seams — so the rows lock together at each junction.
- Repeat until done, then add the final row's bottom sashing strip the same way.
The order matters more than it looks. Rows built first stay square; long strips assembled separately get pressed consistently; and pinning at cornerstones is what prevents the classic sashing complaint — rows that step sideways like a staircase.
Pressing Direction: The One Choice That Fights Bulk
Press seams toward the sashing strip, always. Sashing is usually a lighter, single fabric; pushing the seam allowance under it spreads the bulk across a stable strip instead of stacking it against a many-seamed block edge. Where sashing meets cornerstones, press toward the cornerstone. Consistency is what lets the intersections nest when rows join — press some seams left and some right and nothing will match, no matter how carefully you pin.
Size Insurance: Measure, Don't Trust
Before the rows join the long strips, measure each row across its middle. If rows disagree by more than a quarter inch, ease the difference along the seam rather than stretching one edge to meet the other — the same discipline as squaring up blocks, just at quilt scale. A top that lands a half-inch uneven will still bind and quilt beautifully if the borders, covered in our borders guide, are measured from the flattened center afterward.
The Bottom Line
Sashing is straight sewing wearing a math costume: strips cut finished-plus-one, lengths cut to the unfinished block, seams pressed toward the sashing, and rows pinned at cornerstones. Get those four habits right and the lattice comes out flat and lined-up — and a modest stack of blocks turns into a quilt with room to breathe.
Frequently Asked Questions
What is sashing on a quilt?
Sashing is the strip of fabric sewn between quilt blocks and around their edges — the lattice that separates the blocks instead of sewing them directly together. Quilters add it to give busy blocks breathing room, to make small blocks cover a bigger quilt, and to even out blocks that don't quite match in size.
How wide should quilt sashing be?
Between 1.5 and 3 inches finished is the comfortable range — 2 inches finished (cut 2.5 inches) is the most common choice and matches standard jelly-roll strip width. Narrower than 1 inch finished starts fighting the block seams; wider than 3 inches begins to look more like a border than a divider.
How do I figure out the length of sashing strips?
Cut each strip the length of the unfinished block measurement — a 12-inch finished block cut at 12.5 inches takes a 12.5-inch sashing strip. The strip's width equals the finished width plus 1 inch of seam allowance. For the long strips between rows, assemble them from the same width and cut or piece them to the row length before sewing.
Ready to stitch?
Everything mentioned in this guide, picked for beginners.
Shop quilting supplies on Amazon ↗Sponsored link — we may earn a commission at no cost to you.